|
|
Building Heating System Controller Using Zigbee
Mičulka, Lukáš ; Šimek, Václav (referee) ; Růžička, Richard (advisor)
This thesis is focused on the design and implementation of heating controller system of the model house. In terms of design is the emphasis on simplicity, efficiency and scalability. Implemented heating controller system includes a central controller unit and modules that are placed around the model house and can perform several functions - temperature measurement, control actuators or remote parts of the wireless link. This thesis describes the complete development from the initial system design through assembly of all elements of hardware, firmware implementations for each module type and a control program running in the control unit. It also describes the communication between system elements. Suitably chosen solution combines wired and wireless connections, depending on how it is ideal in terms of the model house. The whole system of functional prototypes was tested and the results were summarized in the conclusion.
|
|
|
Heating of the School Building
Holková, Soňa ; Wierzbická, Helena (referee) ; Vendlová, Lucie (advisor)
The subject of this bachelor's dissertation is heating of the Primary and the Kindergarten school's buildings. The main aim is to make a design of the heating system and the hot water preparation. The source of the heat is the hot-water pipe, which the buildings are connected trough the heating coil to.
|
|
|
Hot water heating systems.
Prát, Michal ; Elcner, Jakub (referee) ; Katolický, Jaroslav (advisor)
This essay summarises essential components of hot water heating systems and theirs division as consistent with geometric, material and functional options. Further here are mentioned particular possibilities of hot warer heating systems, theirs estimation in the case of pertinence operating and last but not least also comfort for one´s user.
|
|
|
Design of heating and ventilation system for the building with low energy costs
Halm, Petr ; Elcner, Jakub (referee) ; Hejčík, Jiří (advisor)
The thesis is aimed on a proposal from heating sources, heating systems and ventilation of family house. Designing of a house is provided by Keeo4design. This proposal contains a complex of two houses. The first one is used for residential purposes, the other is made up of mostly parking garages. The work focuses on heat loss calculation objects. Subsequently, on a proposal from heating sources, heating systems, ventilation systems and their regulation.
|
|
|
Design of heat source for heating a family house
Kotráš, Pavel ; Lachman, Jakub (referee) ; Baláš, Marek (advisor)
The main aim of this bachelor thesis is a proposal of a heat source for a specific house. The first part is a research of different heating technology. In the second part there is a shortlisting of heat sources for this specific house and then calculating of costs for the selected heating sources. These costs are calculated from heat losses of the object. After the economic comparison one source is selected, from which costs of heating are calculated with three versions of possible insulation of this house.
|
|
|
Design of heating by using process Building Information Modeling (BIM)
Horák, Jiří ; Hirš, Jiří (referee) ; Maurerová, Lenka (advisor)
This thesis processes heating of the apartment house in Rožnov pod Radhoštěm, Vsetín district. Revit program was used for the design of the heating. Some calculations were made in Revit too. Then the correctness of the calculations was checked. The Revit families were made in this thesis. These families support the calculations and design automation. Then these procedures were applied to the apartment house. It is five floors building with 1012 m2 of built area. Thesis solves design of heating and technical room equipment. The technical room is placed in first floor. Heat supply is solved as central heat supply system. The ventilation is mechanical, equal pressure. Thesis is in – cooperation with the house planner and the air – conditioning system design.
|
|
|
Heating the building for youth and free time
Horák, Jiří ; Počinková, Marcela (referee) ; Horák, Petr (advisor)
The content of this thesis is the treatment of heating of a multipurpose building for youth and leisure time in Letovice, Blansko district. The building has three floors with a total built-up area of 1003 m2. Thesis solves a design of the heating system of the first floor including solution to the boiler room for heating the whole building. The boiler room is located on the ground floor. Pellet boilers are designed for heating purpose. Solar system is designed for preheating drinking water. Room ventilation in building is designed as a natural.
|
|
|
Heating and hot water of pension
Beneš, Josef ; Formánek, Marian (referee) ; Počinková, Marcela (advisor)
The Bachelor thesis deals with heating system and preparation of hot water for a boarding house building. In the thesis is introduced fundamental systematics of heat line water systems and heating distribution. By the most frequently used materials are identified advantages, disadvantages and possibilities of application. Piping joints are divided according to disassembleability and single options are furthermore described. In the calculating part is analyzed the particular building based on its characteristics. According to this analysis is the building classified from the viewpoint of energetic demands and therefore was determined its “Building envelope energy label”. Based on those and additional data was designed the heating system in correspondence with national regulations. Suggested solution takes in account efficiency, comfort, acquisition and operating costs.
|
|
|
Heating of the production facility with administration
Bardarov, David ; Horká, Lucie (referee) ; Topič, Jan (advisor)
This Bachelor thesis consists of three main parts. The first one is theoretical and describes heating systems, their types and circulation pumps. The second part consists of calculations and describes heating framework and heating water in an industry hall with office in region Troubsko. It is a two-floor building with no basement. Both floors will be heated by board and tubular radiators. The source of heating will be two gas condensation boilers. There will be complete calculations and suggested important elements needed for running the whole system compiled in this Bachelor thesis. In the final part I processed technical report and drawing documentation.
|
|
| |
guest ::
